A Chipseal is a surface application used to maintain, protect and prolong the life of an existing street or road. It will improve the skid resistance to allow for a safer driving surface, improve the overall appearance, provide a weatherproof membrane to repel moisture from damaging the base and extends the useful life of the existing pavement by 8 to 12 years.

A Slurry Seal is a surface application used to maintain, protect and prolong the life of an existing asphalt pavement. It will also improve the skid resistance to allow for a safer driving surface and improve the overall appearance. Slurry Seal will normally be placed over an existing asphalt surface which is found to be in relatively good shape. Once the Slurry Surface has been applied this should extend the life of the existing pavement by 5 to 7 years

Crack seal is a polymer modified asphalt product when heated becomes a liquid asphalt sealer to seal cracks in existing asphalt and concrete pavements. This product is normally used to seal cracks from 1/8” to 1” in width that exist in the pavement.    Hot pour crack seals are normally used to stop the intrusion of water into the underlying sub-base which can cause damage to the existing asphalt pavement. The crack seal process is also used to keep reflective cracking to a minimum once a surface treatment has been done over the existing asphalt pavement.