Standards, Details, Manuals, Guidelines

Aesthetically Enhanced Detention and Water Quality Ponds

Reference Number: PWES-008.0

Aesthetically Enhanced Detention and Water Quality Ponds.pdf(PDF, 8MB)

Last Updated: 9/1/2010

Bikeway Design Guidelines

Reference Number: PWES-014.0

Bikeway_Design_Guidelines.pdf(PDF, 10MB)

Last Updated: 6/1/2016

Bicycle Wayfinding Guidelines

Reference Number: DOTIES-019.0

Bikeway_Wayfinding_Guidelines.pdf(PDF, 8MB)

Last Updated: 9/1/2023

Complete Streets Guidelines

Reference Number: DOTIES-017.0

Complete_Streets_Guidelines.pdf(PDF, 7MB)

Last updated: 2020

Construction Activities Stormwater Manual

  • The Construction Activities Stormwater Manual has been retired; please refer to Chapter 15 of the Storm Drainage Design and Technical Criteria Manual (this page)

Denver Green Continuum Streets Guidelines

Sanitary Sewer Design Technical Criteria Manual

Reference Number: PWES-006.0

Sanitary Sewer Design Technical Criteria Manual(PDF, 1MB)

Last Updated: 3/1/2008

Small Cell Infrastructure Guidelines

Reference Number: PWES-016.1

Small_Cell_Infrastructure_Design_Guidelines.pdf

Last Updated: February 2022

Visit Small Cell Infrastructure for more information.

Storm Drainage Design and Technical Criteria

Streetscape Design Manual

Reference Number: PWES-002.0

Streetscape Design Manual(PDF, 2MB)

Last Updated: 1/1/1993

Street Lighting Design Guidelines and Details

Reference Number: PWES-012.2

Street_Lighting_Design_Guidelines.pdf(PDF, 5MB)

Last Updated: 9/19/2019

Transportation Design Signal, Sign & Marking Standards

Reference Number: DOTI-ES-009.2

Transportation Design Signal Sign and Marking Standards.pdf(PDF, 9MB)

Last Updated: 2/24/2022

Transportation Standards and Details

Reference Number: PWES-001.5 

Transportation Standards and Details for the Engineering Division(PDF, 4MB)

Last Modified: 4/1/2017


Memo: October 2018 - Standard Sandstone Thickness Waiver

Denver's Department of Transportation and Infrastructure (formerly Denver Public Works) is implementing multiple programs to improve pedestrian mobility in the City. In doing so, DOTI has received and performed research related to the existing portion of public sidewalk that is made of sandstone (flagstone). Current DOTI standards require both concrete and sandstone to have equal thickness when used for sidewalk in the public right-of-way. The results of the research indicate that the compressive strength of primary source of sandstone utilized in the city for public sidewalk exceeds the minimum that is required by DOTI (4,000 psi). This means that similar performance may be achieved using thinner sandstone pieces than is currently authorized.

It is therefore determined that DOTI's Transportation Standards and Details for the Engineering Division (PWES-001.5), Curb & Gutter and Detached Sidewalk (Std. Dwg 5.0), Note 4, subsection b), enacted April 1, 2017 shall be waived and replaced with the following statement:

Sandstone must be at least 2-1/2" thick by 5' long (minimum) by 2' wide (minimum). Driving surfaces should be at least 4" thick.

The waiver shall take effect immediately.

Ultra Urban Green Infrastructure Guide

Reference Number: PWES-013.0

Ultra_Urban_Green_Infrastructure_Guide.pdf(PDF, 26MB)

Last Updated: 3/1/2016

Report Sections

  • Introduction
  • Site-Scale Green Infrastructure Practice Selection, Design, and Maintenance
  • References
  • Fact Sheets
    • Streetside Stormwater Planter Fact Sheet
    • Bumpout Stormwater Planter Fact Sheet
    • Green Gutter Fact Sheet
    • Green Alley Fact Sheet
    • Tree Trench/Pit Fact Sheet
  • Appendices
    • Development Plan Review Checklist
    • Inspection and Maintenance Checklist
    • Plant Lists
    • Forestry Memo

Uncontrolled Pedestrian Crossing Guidelines

Reference Number: DOTIES-015.2

Uncontrolled_Pedestrian_Crossing_Guidelines.pdf(PDF, 3MB)

Last Updated: 4/1/2022

Wastewater Capital Projects Standard Construction Specifications

Reference Number: PWES-010.0

Wastewater_Capital_Projects_Standard_Construction_Specifications(PDF, 3MB)

Last Updated: 3/15/2016

Related: Wastewater Engineering and Construction Resources for specifications, requirements, general notes, other technical documentation

Wastewater Management Standard Detail Drawings

Reference Number: PWES-011.2

Wastewater_Management_Standard_Detail_Drawings.pdf(PDF, 6MB)

Last Updated: 8/20/2020

Related: Wastewater Engineering and Construction Resources for specifications, requirements, general notes, other technical documentation

Water Quality Management Plan

Reference Number: PWES-004.0

Water Quality Management Plan(PDF, 18MB)

Last Updated: 1/1/2004